UniFi Protect iOS 3.11.1 adds the improvement below.

Improvements

• Improved the user experience for G6 Edge cameras.

UniFi Protect iOS 3.11.0 adds support for Time and Motion cycling in Multi-View and Device Tag filtering to the Dashboard, along with improved livestream playback.

Improvements

• Added support for Time and Motion cycling in Multi-View.
• Added Event Scrubber support in portrait full-screen playback.
• Added Device Tag filtering to the Dashboard.
• Improved full-screen zooming in the Detections Player.
• Improved livestream playback over direct UniFi Console connections.
• Improved Sensor Manager performance on large deployments.
• Improved overall app performance on large deployments.
• Improved the Events Only Timeline experience.
• Improved Direct Connection reliability when switching consoles, reconnecting, or returning to the app from the background.
• Improved the user experience for G6 Edge cameras.

Bugfixes

• Fixed an issue where recording quality settings could appear for third-party cameras with only one profile.

UniFi Protect iOS 3.10.0 adds a horizontal Event Scrubber to the Detections Player, expands Find Anything with person assignment and Device Tag filtering, and adds Alarm Profile actions to Siri and Shortcuts.

Improvements

• Added a horizontal event scrubber to the Detections Player and improved playback and scrubbing responsiveness.
• Added support for assigning, reassigning, creating, and unassigning people from face detections in Find Anything.
• Added Device Tag filtering to Find Anything.
• Added video compression controls, improved stream profile selection, and contextual recording settings for third-party cameras.
• Added support for configuring third-party cameras in Recording Manager.
• Requires Protect 7.2 or newer.
• Added Arm Alarm and Disarm Alarm actions for Alarm Profiles in Siri and Shortcuts.
• Added Notification Grouping to App Preferences.
• Requires Protect 7.2 or newer.
• Added open, closed, and tamper activity statistics for Entry Sensors.
• Added a mute control to the Doorbell Ring View.
• Improved the Event Scrubber on iPad.
• Improved the Event Scrubber experience in Timeline.
• Improved performance on large deployments.
• Improved timelapse playback performance.
• Improved the smoke sensor test experience with pending and running states and the ability to stop a test.
• Improved app responsiveness when connecting to a UniFi Console.

Bugfixes

• Fixed an issue where stale console information could be used when connecting to a selected UniFi Console.
• Fixed an issue where Legacy Camera Enhancement could not be enabled for all cameras when no compatible cameras were connected.
• Requires Protect 7.2 or newer.
• Fixed an issue where the app could close unexpectedly when a console returned invalid connection information.
• Fixed an issue where the tab bar could cover search and clip selection controls in Find Anything on Mac.

UniFi Protect iOS 3.9.0 adds event scrubbing in Timeline, PPE safety violations, expanded third-party camera settings, and Floodlight controls in Siri and Shortcuts, along with improved Sensor controls.

Improvements

• Added a horizontal event scrubber to Timeline for previewing and seeking within event recordings.
• Added frame preview scrubbing for detection clips.
• Added PPE safety violations to Timeline and explanatory information for the Safety Violations filter in Find Anything.
• Added recording quality details and stream profile selection for third-party cameras.
• Requires Protect 7.2.72 or newer.
• Added Point of Sale and refund events to Timeline, along with Point of Sale filters in Find Anything.
• Added Floodlight controls to Siri and Shortcuts, including power and brightness controls.
• Added support for editing the email address during account creation.
• Added a Clear Filters action when Find Anything returns no results.
• Improved app performance and responsiveness.
• Improved reliability when connecting directly to a UniFi Console by IP address.
• Moved Spatial Intelligence controls to Camera Settings and added Industrial Smart Zones for configuring helmet and safety vest enforcement on supported cameras with AI Key.
• Added support for updated Intelligence settings.
• Requires Protect 7.2.98 or newer.
• Added resolution, frame rate, and video compression settings for standalone third-party cameras, including Auto and Custom modes.
• Requires Protect 7.2.98 or newer.
• Added Watermark settings for supported cameras, including drag-and-drop corner positioning.
• Added support for playing, downloading, and deleting retained clips from cameras that were removed.
• Improved app performance in large deployments.
• Improved Sensor, Relay, and Fob connection settings with inline gateway selection and device locking.
• Improved camera pairing for Sensors, Floodlights, AI Speakers, and AI Horns with camera snapshots and playback access from device overviews.
• Improved Entry Sensor overviews with device status and a 24-hour activity timeline.
• Improved clip selection in Find Anything with a new toolbar menu and dedicated Delete and Export actions.
• Improved storage management by adding direct links to native UniFi Console storage settings.
• Improved two-way talk controls across Timeline, PTZ, doorbell ring, and speaker views.
• Improved Dashboard navigation by moving Multi-View into the View menu.

Bugfixes

• Fixed an issue where sensor names could be truncated despite sufficient available space.
• Fixed an issue where the app could close unexpectedly while processing camera updates.
• Fixed an issue where detection events could appear multiple times in Dashboard activity.
• Fixed an issue where the Protect app icon could render incorrectly in the Clear and Tinted appearance modes.
• Fixed an issue where the Control Plane could remain on a loading screen when the Protect application was unavailable.
• Fixed an issue where the device adoption panel background could be missing when the app opened.
• Fixed an issue where event thumbnails could display with an incorrect aspect ratio in Timeline.
• Fixed an issue where the app could close unexpectedly when presenting MFA on the latest macOS version.

UniFi Protect iOS 3.8.0 adds support for Sensor Manager, Webhook Shortcuts, digital zoom support for PTZ cameras along with improvements to Timeline.

Improvements

• Added Sensor Manager support to the Dashboard.
• Added IdP login support for Fabric and MSP Group administrators using SAML authentication.
• Requires Site Manager 5.8.0.
• Added the ability to pin Spotlights.
• Added Alarm Selection to Alarm Profiles.
• Added the ability to select Person and Vehicle filters in Find Anything.
• Added support for Webhook Shortcuts.
• Added digital zoom support for PTZ cameras in PTZ mode.
• Added support for dewarped clip downloads.
• Added Dashboard IoT reordering.
• Added the ability to select USL Relay outputs in iOS Shortcuts.
• Added PiP overlay support in more areas.
• Added an LED toggle for Air Quality Sensor.
• Added date filtering to System Logs.
• Improved the login experience.
• Improved the edit Shortcuts experience.
• Improved the Timeline experience.
• Improved the last detection time label format on the Dashboard.

Bugfixes

• Fixed an issue where the last motion label on the Dashboard did not update.
• Fixed an issue where Timeline events might not update after the app resumed from the background.
• Fixed an issue where switching Dashboard layouts could cause a mismatch between streams and camera names.
• Fixed an issue where alarms could not be created from Fabrics.
• Fixed an issue where Fabric Sites filters did not respect Offline UniFi consoles.
• Fixed various navigation bar issues on the latest iOS version.

UniFi Protect iOS 3.7.0 adds support for Vehicle Auto Tracking, Edge AI Latency chart, along with improvements to two-way talk stability.

Improvements

• Added battery replacement instructions for Remote Control KeyFob.
• Added Vehicle Auto Tracking.
• Added Edge AI Latency chart to NVR Details.
• Added Dashboard message support for USL Glassbreak events.
• Added the ability to stop all sirens.
• Added Spotlights to Recent Detections on the Dashboard.
• Improved the Find Anything experience by aligning copy with the web application.
• Improved two-way talk stability.
• Improved the firmware update experience for the Remote Control KeyFob.

Bugfixes

• Fixed an issue where dewarp did not work when opening a fisheye camera recording from a notification.
• Fixed an issue where video was not displayed correctly in full-screen PTZ mode on iPad.
• Fixed an issue where Shortcuts were not displayed in the video overlay.
• Fixed an issue where an incorrect animation appeared when exiting Shortcuts edit mode.
• Fixed an issue where the Shortcuts button was not displayed in Timeline view for supported cameras.
• Fixed an issue where Alarm Manager could load an empty alarm list in certain scenarios.
• Fixed an issue where Apply Enhancement in Find Anything could get stuck in a loading state.
• Fixed an issue where the Timeline timestamp could be out of sync with live time after the app resumed from the background.
• Fixed an issue where the New Device Found pop-up could rotate into landscape mode.
• Fixed an issue where live playback did not resume after the app returned from an inactive state.
• Fixed an issue where the Get Started button could fail during archiving setup.

UniFi Protect iOS 3.6.0 adds support for Fabrics, dewarp mode in Multi-View, and SIA DC-09, along with improvements to the device adoption user experience.

Improvements

• Added support for Fabrics.
• Added support for Remote Control KeyFob.
• Added dewarp mode support in Multi-View.
• Added SIA DC-09 Alarm response integration with your local security service provider.
• Added a camera capacity widget to NVR details.
• Added bitrate and latency widgets to NVR details.
• Added localization support for USL Relay wiring diagrams.
• Improved the device adoption user experience.
• Improved the doorbell user experience by enabling HQ livestreams.
• Improved the user experience of buttons and slide-out elements.

Bugfixes

• Fixed an issue where AI Multi Sensor 4 could appear as multiple offline devices on the Dashboard.
• Fixed an issue where images for certain devices might not display correctly.
• Fixed an issue where camera snapshots could appear stretched in landscape mode.

UniFi Protect iOS 3.5.0 adds support for PTZ portrait mode, full-screen mode for cameras with tall aspect ratios, dewarping support for Advanced encoding and improved performance of two-way talk.

Improvements

• Added support for PTZ portrait mode.
• Added a field of view indicator for PTZ cameras.
• Added a portrait full-screen mode for cameras with tall aspect ratios.
• Added Display Settings for G6 Pro Entry.
• Added dewarping support for Advanced encoding.
• Added a shortcut to Settings > Intelligence from AI Key settings.
• Improved the Site Manager user experience.
• Improved the performance and reliability of two-way talk.
• Improved the user experience by hiding the top and bottom navigation bars while scrolling.
• Improved the Submit Feedback experience by separating email and support toggles.

Bugfixes

• Fixed an issue where switching between warped and dewarped modes caused the player to be misaligned to the left.
• Fixed an issue where the Arm alarm button was not visible on the Dashboard when correct granular permissions were configured.
• Fixed an issue where two-way talk could fail if a doorbell was opened from a notification before the ring UI fully appeared.
• Fixed an issue where connecting to a UniFi Console could fail after the app remained in the background for an extended period.
• Fixed an issue where the app could close unexpectedly when approving a direct connection from a pop-up.

UniFi Protect iOS 3.4.1 fixes an issue mentioned below.

Bugfixes

• Fixed an issue where Protect-only Full Admin users could not see the console in Site Manager.

UniFi Protect iOS 3.4.0 introduces new Dashboard layouts, AV1 video clip export, and an Intelligence section in Settings, as well as improvements to the Find Anything experience.

Improvements

• Added dashboard layout options: List view, Grid view, and Compact Grid.
• Added expand/shrink controls for 180° cameras.
• Added a minimap for 180° cameras when expanded.
• Added Double-Tap to Skip option in Timeline Playback Settings.
• Added landscape mode support for the Spotlights Timeline.
• Added AV1 video clip export to the Files app.
• Added schedule editing in Recording Settings.
• Added Play Tone and Test Tone buttons for doorbells and chimes.
• Added the Intelligence section in Settings.
• Added an Edge AI Utilization graph and Standard Lane Policies to Intelligence settings (AI Key required).
• Added interactive GIF cropping for doorbell messages.
• Added support for creating and editing Shortcuts.
• Added Arabic localization.
• Improved BLE device discovery experience when no UniFi Console is set up.
• Improved Door Overview user experience.
• Improved player maximum zoom from 4x to 8x.
• Improved clip export reliability with retry support.
• Changed the Recognitions tab by merging it into Find Anything.
• Disabled chime controls when no chime is paired.

Bugfixes

• Fixed an issue where UniFi Console owners could see an insufficient permissions error when opening a detection clip.
• Fixed a delay when tapping links in System Logs.
• Fixed dashboard scroll issues on iOS 18.
• Fixed an issue allowing the video player to zoom beyond stream boundaries.
• Fixed an issue where the sensor chart incorrectly indicated values were out of bounds.
• Fixed Smart Zone display for non-16:9 cameras in Hallway mode.
• Fixed an issue where AI Port could be paired while updating.
• Fixed an issue where sensors might not display the battery indicator.
• Fixed an issue where UNVR Instant super admins could not open Multi-View selection when grids were not shared.

UniFi Protect iOS 3.3.0 adds support for receiving doorbell rings as phone calls, Continuous Archiving and Camera Edge recording.

Improvements

• Added support for receiving doorbell rings as phone calls (enable in the Alarm Manager; not available in China).
• Added support for finding devices via native iOS search.
• Added Continuous Archiving support under Settings > System > Archiving.
• Added support for Camera Edge recording.
• Added the ability to change playback speed in Timeline via long press.
• Added graphs to the Sensor Activity tab.
• Added support for the USL-GlassBreak.
• Improved the package camera experience by retaining state.
• Improved the Camera Limit Exceeded experience.
• Improved filter usability in Find Anything.

Bugfixes

• Fixed an issue where the sensor battery indicator height was incorrect.
• Fixed an issue where the Dashboard may not fully load when the app is opened via Favorites.
• Fixed an issue where the Timeline camera drawer could open an incorrect camera stream.

UniFi Protect iOS 3.2.0 adds support for Site Manager, additional languages and improves the connection resiliency.

Improvements

• Added dewarp support in the detections player.
• Added additional language support.
• Added Site Manager with grid and list layout options.
• Improved the Protect application installation on the UniFi Console user experience.
• Improved Timeline user experience when cameras have different aspect ratios.
• Improved connection resiliency.

Bugfixes

• Fixed an issue where zone overlay expands over black space outside the video when in Hallway mode.

UniFi Protect iOS 3.1.0 introduces the iOS 26 Liquid Glass top navigation bar, adds Control Plane and Admins management in Settings, and enhances the Find Anything experience.

Improvements

• Added support for iOS 26 Liquid Glass top navigation bar.
• Added Control Plane in Settings.
• Added Admins management in Settings.
• Added filter for 5K cameras in Recording Manager.
• Added the ability to select Patrol for compatible PTZ cameras.
• Added the ability to select a Multi-View preset for the UNVR Instant.
• Added the ability to create LPR Spotlights.
• Added the ability to stop a UP-Siren-triggered alarm.
• Improved the Find Anything experience by showing similar events individually instead of grouping them.
• Improved the clarity of Device list status messages.

Bugfixes

• Fixed an issue where Timeline text could be cut off.
• Fixed an issue where Bluetooth-adoptable cameras could get stuck in the booting state.
• Fixed an issue that could cause the app to crash during Bluetooth device setup.

UniFi Protect iOS 3.0.1 adds the improvement below.

Improvements

• Improved the user experience for USL Entry.

UniFi Protect iOS 3.0.0 adds iOS 26 support, webhook triggers in Alarm Manager, and enhancement to the doorbell talk view.

Improvements

• Added support for iOS 26 and the Liquid Glass bottom navigation bar.
• Added door unlock Shortcuts to the doorbell talk view.
• Added the ability to create Known Face Spotlights.
• Added webhook support as a trigger in the Alarm Manager.
• Improved the doorbell talk view by opening the detections player for events older than 1 minute.

Bugfixes

• Fixed an issue where the UniFi Console's "last online" status did not display days.
• Fixed an issue where the PTZ controls button was enabled while the site was armed.
• Fixed an issue that allowed horizontal swiping in the Devices view when viewing search results.

UniFi Protect iOS 2.14.0 adds connection strength to the device list for sensors and improvements to the Alarm Manager.

Improvements

• Added connection strength and battery indicator in the device list for sensors.
• Added a link to App Preferences in the Settings view.
• Added the Play Sound - Siren action in the Alarm Manager.
• Added an indicator in the Alarm Manager list when an alarm is paused.
• Added support for creating and managing Alarm Profiles.
• Added the ability to dismiss Dashboard warnings when a device is offline.
• Changed the connection strength scale from 8 bars to 10 for sensors.

Bugfixes

• Fixed an issue where the transcript button appeared for unsupported languages when using an AI Key.

UniFi Protect iOS 2.13.2 includes the improvement mentioned below.

Improvements

• Enable the Spotlights feature by default only for deployments with an AI Key.

UniFi Protect iOS 2.13.1 adds support for the Arm feature, zone-based bitrate, and enables the Spotlights feature by default.

Improvements

• Added the ability to pause/resume an alarm in the Alarm Manager.
• Added support for creating Loitering zones.
• Added support for the Arm feature. The ability to create and manage alarm profiles will be added to future releases.
• Added support for a unique device recovery password.
• Added support for zone-based bitrate.
• Enabled the Spotlights feature by default.
• Improved the user experience when a camera is paired with an AI Horn Speaker by preselecting it as the two-way audio device.

Bugfixes

• Fixed an issue where a vehicle detection highlight icon was shown for a bicycle.
• Fixed an issue where the mute/unmute button was briefly unresponsive in the Timeline.
• Fixed an issue where the alarm notify action is duplicated in the Alarm Manager.
• Fixed an issue where the SuperLink clients list updates only after an app restart.

UniFi Protect iOS 2.13.0 adds support for viewing Vantage Points, pairing IoT devices with a camera and improvements for Spotlights.

Improvements

• Added support for viewing Vantage Points. *
• Added support for creating Activity and AI Spotlights.
• Added support for copying values on long press in the device details view.
• Added the ability to pair the Floodlight with a camera.
• Added the ability to pair the UP Sense with a camera.
• Added the ability to lock the UP Sense to the SuperLink.
• Added client list for the SuperLink.
• Added the Disable When Recording setting under the camera microphone settings.
• Changed icons for Dashboard and Devices in the navigation bar.
• Improved the Spotlights user experience when scrubbing through events.
• Improved Adaptive recording mode performance when viewer quality is set to HQ.

* Support for creating and managing Vantage Points will be added in a future release.

Bugfixes

• Fixed an issue where recordings may randomly freeze when using "Highest" video quality on third-party cameras paired with the AI Port.
• Fixed an issue where a Custom role with Full Management role cannot access the UP Chime.
• Fixed an issue where the AI Horn Speaker's minimum volume could be set to 0%.
• Fixed an issue where Timeline detection thumbnails were too large.
• Fixed an issue where the Floodlight Dashboard widget's name gets cut off.
• Fixed an issue where the Disable Microphone button does not work when tapped on an empty cell area.
• Fixed an issue with incorrect estimated retroactive processing time for the AI Key.
• Fixed an issue where motion event times in the Dashboard use 12-hour format even when the 24-hour format is configured in settings.

UniFi Protect iOS 2.12.4 fixes the issue mentioned below.

Bugfixes

• Fixed an issue where the device image might be missing for G6 camera series, AI Horn, or AI PTZ Industrial.