Service release for airMAX AC.

Mise à jour corrective pour airMAX AC.

Improvements

• Regulatory: Aligned Loco5AC radio regulatory requirements.
• Regulatory: Aligned LAP-GPS radio regulatory requirements.
• UISP: Improved integration with UISP.

• Réglementaire : Alignement Loco5AC avec les exigences réglementaires radio équipement.
• Réglementaire : Alignement LAP-GPS avec les exigences réglementaires radio équipement.
• UISP : Amélioration de l’intégration avec UISP.

Bugfixes

• WebUI: Fixed Allow Insecure Protocols showing disabled after upgrade from older/unsupported firmware.

• WebUI : Correction d’un problème où l’option « Autoriser les protocoles non sécurisés » apparaissait comme désactivée après une mise à niveau depuis un firmware ancien ou non pris en charge.

Service release for airMAX AC.

Improvements

• airOS security improvements.

Service release for airMAX M.

Improvements

• airOS security improvements.

Service release for airMAX M.

Bugfixes

- Fixed an issue preventing firmware upgrades through UISP.

Known issues

Upgrading from versions v6.3.18 and v6.3.20 to newer releases via UISP is not available. Please use the Web UI to update to v6.3.22.

Additional information

When Hashes Change

Passwords will only be hashed using the SHA-512 method for more secure password storage when you change your password or perform a factory reset. If you upgrade the firmware without changing your password, the existing password hash will remain unchanged for compatibility reasons.

Downgrading Considerations

If you change your password after upgrading (thereby switching to SHA-512) and then downgrade to an older firmware version, the WebUI will prompt you to re-enter your current password so it will be re-hashed using the previous format retaining backwards compatibility.

Service release for airMAX M.

Bugfixes

- Web-UI: The login page is inaccessible when HTTPS is disabled in the Web Server configuration.

Additional information

When Hashes Change

Passwords will only be hashed using the SHA-512 method for more secure password storage when you change your password or perform a factory reset. If you upgrade the firmware without changing your password, the existing password hash will remain unchanged for compatibility reasons.

Downgrading Considerations

If you change your password after upgrading (thereby switching to SHA-512) and then downgrade to an older firmware version, the WebUI will prompt you to re-enter your current password so it will be re-hashed using the previous format retaining backwards compatibility.

Service release for airMAX M.

Improvements

- Security: Support SHA-512 password hashing on password change or factory reset.

- Security: System security updates.

- Security: Improved First Login page: added options change default Username and Password.

Additional information

When Hashes Change

Passwords will only be hashed using the SHA-512 method for more secure password storage when you change your password or perform a factory reset. If you upgrade the firmware without changing your password, the existing password hash will remain unchanged for compatibility reasons.

Downgrading Considerations

If you change your password after upgrading (thereby switching to SHA-512) and then downgrade to an older firmware version, the WebUI will prompt you to re-enter your current password so it will be re-hashed using the previous format retaining backwards compatibility.

Service release for airMAX AC.

Improvements

- Security: The Allow Insecure Protocols option is no longer enabled by default after a firmware upgrade.

- Security: The Allow Legacy Protocols option has been removed.

- System: Stability improvements.

Bugfixes

- Web-UI: Corrected an issue that caused the service to restart when unrelated settings were changed.

Additional information

When Hashes Change

Passwords will only be hashed using the SHA-512 method for more secure password storage when you change your password or perform a factory reset. If you upgrade the firmware without changing your password, the existing password hash will remain unchanged for compatibility reasons.

Downgrading Considerations

When downgrading below 8.7.18 firmware. If you change your password after upgrading (thereby switching to SHA-512) and then downgrade to an older firmware version, the WebUI will prompt you to re-enter your current password so it will be re-hashed using the previous format retaining backwards compatibility.

Service release for airMAX AC.

Improvements

- Security: Support SHA-512 password hashing on password change or factory reset.

- Security: Implemented a 30-second lockout after multiple consecutive failed login attempts to reduce brute-force risk.

- Security: System security updates.

- Regulatory: Aligned Loco5AC radio regulatory requirements.

- UISP: Improved integration with UISP.

Additional information

When Hashes Change

Passwords will only be hashed using the SHA-512 method for more secure password storage when you change your password or perform a factory reset. If you upgrade the firmware without changing your password, the existing password hash will remain unchanged for compatibility reasons.

Downgrading Considerations

If you change your password after upgrading (thereby switching to SHA-512) and then downgrade to an older firmware version, the WebUI will prompt you to re-enter your current password so it will be re-hashed using the previous format retaining backwards compatibility.

Service release for airMAX AC.

Improvements

- Updated frequency plan for Ukraine.

- Aligned LAP-GPS radio regulatory requirements.

- Updated E-label for R5AC-Lite.

Service release for airMAX AC.

Improvements

- Security: Disabled insecure protocols: TLSv1.0 and TLSv1.1.

- Web UI: Updated ToS and Privacy Policy.

Additional information

To enable Speed Test tool backwards compatibility with older AC firmware and M-series devices we added "Allow insecure protocols" toggle under Web Server settings.

Service release for airMAX M.

Improvements

- Security: Disabled insecure protocols: TLSv1.0 and TLSv1.1.

Known issues

Speed Test will not work with any airMAX AC firmware versions at or below v8.7.14. This issue will be addressed in a future airMAX AC firmware release.

Additional information

You can find "-CS" versions that support custom scripts HERE.

Service release for airMAX AC.

Improvements

- Regulatory: updated E-label.

Bugfixes

- System: Fixed an issue where the power time displayed an abnormally large value.

- System: Fixed an issue where the Litebeam 5AC XR failed to display GPS results.

- Wireless: Fixed a problem causing Rocket AC clients to disconnect during high CPU and RAM usage.

Service release for airMAX M.

Improvements

- Security: Implement login lockout after 3 consecutive failed attempts to prevent brute force and automated attacks.

Bugfixes

- Web-UI: Session timeout not functioning on the "Main" page.

Additional information

You can find "-CS" versions that support custom scripts HERE.

Service release for airMAX AC.

Improvements

- Regulatory: updated E-label for PS-5AC.

- System: Reduced device memory consumption when using UISP.

- Wireless: Show signal level when the station is only partially connected.

- Wireless: Keep remote statistics for a longer period of time.

Bugfixes

- Web UI: Fixed Armenia country label.

- System: Fixed management radio timeout while using UISP mobile app.

- Wireless: Fixed station crashing when not connected to AP for a long period.

Service release for airMAX M.

Improvements

- Security: Enhanced requirement for new admin password: minimum 12 characters and must contain at least one uppercase letter, one lowercase letter, one special character and one number.

Additional information

You can find "-CS" versions that support custom scripts HERE.

Service release for airMAX AC.

Improvements

- System: Upgraded curl to v8.4.0.

- System: Various stability improvements.

- System: Reduced management radio timeout to 15 minutes.

- Regulatory: Updated frequency plan for Japan.

- Regulatory: DFS radar detection improvements.

- UISP: Improved integration with UISP.

- Web UI: Updated ToS and Privacy Policy.

- Wireless: Default link name changed to "uisp".

- Security: Upgraded OpenSSL to v1.1.1t.

- Security: Increased minimal password length requirement to 12 characters.

Bugfixes

- UISP: Various fixes.

- System: Fixed crash when enabling LED night mode.

- System: Fixed Wireless Connection time overflow.

- System: Fixed DHCP Option 82 causing too many log entries.

- System: Fixed Access Point crashing in Flexible Legacy mode.

- System: Fixed PBE-5AC-500 stuck on boot.

- System: Fixed AP not showing site survey scan results for DFS channels.

- Wireless: Fixed invalid MCS9 rate reporting information for VHT20.

- Web UI: Corrected Management radio timeout labels.

AF60-HD/XG 1.1.1 includes the below improvements and bugfixes.

Improvements

• Added Japan wireless support.
• Now using outdoor channels for wireless backup radio.
• Added custom validation for static or DHCP IP address.
• Changed default SSID from "ubnt" to "uisp".
• Increased minimal password length requirement to 12 characters.
• Updated OpenSSL to 1.1.1u.

Bugfixes

• Fixed device SLAAC IPv6.
• Extended driver interface statistics.
• Fixed "mac is not correct" syslog issue.
• Fixed Link Potential always showing zero when only the backup radio link is established.
• Fixed connection if AP/STA has a different firmware version.
• Fixed using IPv6 addresses for speed tests.
• Fixed LLDP to apply on fly.
• Fixed speed test on backup radio after changing bandwidth.

GigaBeam 1.4.4 adds support for the 5725-5875Mhz backup radio range.

Improvements

• Added support for U-NII-3 (302-502) / B4 range 5725-5875Mhz.
• Enabled ICMP prioritization in QoS by default.
• Added custom validation for IP address.
• Increased minimal password length requirement to 12 characters.
• Reduced management radio timeout to 15 minutes.
• Changed default SSID name from ubnt to uisp.

Bugfixes

• Fixed speed test when using IPv6 addresses.

UISP

• Fixed EIRP power configuration.
• Fixed an issue with applying LLDP configuration.
• Fixed an issue with subsystem ID in API / device.

GigaBeam 1.4.3 adds support for Japan and Kazakhstan while updating the regulatory domain database.

Improvements

• Updated Gigabeam product pictures on Dashboard.
• Updated OpenSSL to 1.1.1u.
• Improved GBE-Plus initial setup flow.
• Added SSH login banner message with TOS and EULA references.

Wireless

• Added Japan support.
• Added Kazakhstan support.
• Updated 5/60 radio regulatory domain database for: BR, CL, CY, EG, FR, IL, PK, RU, ZA, AR, AT, BE, BR, CO, CZ, DE, ES, FI, IE, MA, MX, MY, NG, NI, PL, SE, TH, US.

Bugfixes

• Fixed Bluetooth management button on dashboard.
• Fixed an issue with the backup EIRP toggle.
• Fixed GBE-Plus not able to restore configuration during setup.

UISP

• MTU is now correctly applied on /system/airos/configuration endpoint.
• IPv6 configuration is now correctly saved on /system/airos/configuration endpoint.

• Service release for AF60-HD/XG

Improvements

• Regulatory: added Kazakhstan support.
• Regulatory: updated South Africa 5GHz band.
• Regulatory: updated Austria 60GHz band.
• System: stability updates.
• Security updates.

Bugfixes

• System: crash reporting improvement.
• Network: fixed missing default route for management VLAN.
• Tools: Speed test: fixed speed test with management VLAN.